Stump Grinding Cost in Kansas (2026)

Stump grinding in Kansas usually costs $130 to $275 for one average 24-inch stump, about $195 typical and about 7% below the U.S. average. Kansas prices sit below average, with storms driving demand.

Professional stump grinding service with a tracked grinder chewing into a huge stump in Kansas
$195
Typical price, one 24" stump
$130–$275
Common range, 24" stump
$1.86–$4.65
Per inch of diameter
−7%
Versus the U.S. average

How much does stump grinding cost in Kansas?

Grinding one average stump in Kansas costs about $195, with most quotes between $130 and $275 for a 24-inch stump. That is 7% below the national average. Small stumps usually cost the job minimum of around $140, and each extra stump on the same visit costs far less than the first.

Stump grinding cost by diameter (Kansas, one stump)
Stump diameterLowTypicalHighEach extra stump
6 inches$95$140$190$35
12 inches$105$155$220$40
18 inches$115$175$245$60
24 inches$130$195$275$80
30 inches$140$215$300$100
36 inches$150$235$330$115
48 inches$185$295$420$180
60 inches$220$355$510$240
Typical cost for one 24-inch stump: Kansas vs. similar states
Typical cost for one 24-inch stump: Kansas vs. similar states
U.S. average$210
Kansas$195
Florida$195
Ohio$195
Wyoming$195
Georgia$190

Estimates at typical rates, softwood or average wood, chips left on site.

Tree stump with large exposed surface roots spreading across the lawn
Wide surface roots, common on mature siberian elm trees, add root-grinding time to a quote.

Common trees and stumps in Kansas

Trees homeowners most often grind out in Kansas
TreeWoodWhat it means for price
Siberian elmhardwoodResprouts; grind deep.
CottonwoodhardwoodLarge trunks and suckering roots.
HackberryhardwoodCommon yard tree; moderate hardness.
Eastern red cedarsoftwoodSmall stumps, often many at once.

What drives stump grinding prices in Kansas

Stump diameter sets the base price everywhere, but these local factors move Kansas quotes up or down:

  • Windstorms. Severe storms and tornadoes create bursts of demand.
  • Cedar clearing. Pasture and acreage cedar removals are often priced per hour.

Hardwood vs. softwood stumps in Kansas

Siberian elm, Cottonwood, Hackberry stumps are dense hardwood, so expect about 10% to 25% more than a eastern red cedar stump of the same size. Softwood and palm stumps grind faster and usually sit at the low end of the range.

Example stump grinding quotes in Kansas

Single-stump prices only tell part of the story. These worked examples show what common jobs typically cost in Kansas once multiple stumps, hardwood and extras are included.

Example stump grinding jobs in Kansas
JobTypical priceLikely range
One small 12" softwood stump$155$105–$220
Three 18" stumps, same visit$290$185–$415
One 24" oak stump, chips hauled away$280$205–$370
One 40" hardwood stump with surface roots$430$325–$555
Five 10" stumps after a storm cleanup$300$215–$430

Estimates use local labor costs and typical published rates. Real quotes also depend on access, soil and how busy local crews are. For ways to bring these numbers down, see grinding multiple stumps and the cheapest time of year to book.

Why Kansas prices differ from the national average

Labor is the biggest part of a stump grinding bill. Tree trimmers in Kansas earn a mean of $24.64 an hour, against $26.91 nationally, according to the Bureau of Labor Statistics. The state's overall price level is 90.1 on the Bureau of Economic Analysis scale, where 100 is the U.S. average. We blend both figures to set Kansas prices 7% below the national level.

Tree stump wedged between a house foundation and fence, a hard-access stump grinding job
Stumps close to a house, fence or buried utilities need extra care and often cost more.

Call 811 before stump grinding in Kansas

Grinders cut 6 to 12 inches below ground, deep enough to hit shallow gas, power or irrigation lines. Most professionals request a utility locate first. You can file a free request through Kansas 811 or by dialing 811 at least a few business days before the job.

Best time of year to grind stumps in Kansas

Spring storm season is busiest. Fall and winter are often the easiest times to book.

Stump grinding prices in Kansas cities

  • Wichita
  • Overland Park
  • Kansas City
  • Topeka
  • Olathe

Estimate your own Kansas project

Stump grinding cost calculator

Instant stump grinding price range that updates as you type.

Largest stump, measured across the widest point at ground level.
Wood type
Add extras (optional)
Extras
Estimated total $209 Typical range $140 to $295 One 24-inch stump, U.S. average, chips left on site. Compare free quotes from local pros

Keep reading

Browse all stump guides or go back to the stump grinding costs homepage.

Frequently asked questions

Is stump grinding cheap in Kansas?

Yes. Kansas prices are below the national average.

How is cedar stump grinding priced in Kansas?

Large cedar clearings are often priced per hour, typically $100 to $200 an hour, rather than per stump.

Do I need to call Kansas 811 before stump grinding?

Yes. File a locate a few business days before the job so lines are marked.

How much does it cost to grind a small stump in Kansas?

A small stump up to 12 inches across usually costs $105 to $220 in Kansas. Most companies charge their job minimum for a single small stump, so grinding several at once is far better value.

How much does it cost to grind a large stump in Kansas?

A 36-inch stump typically costs $235 in Kansas, and a 48-inch stump about $295. Very large stumps need bigger machines and more time, so many companies charge a higher per-inch rate above 36 inches.

What is the stump grinding cost per inch in Kansas?

Most companies charge $1.86 to $4.65 per inch of diameter in Kansas, plus a minimum charge. See our stump grinding cost per inch guide for worked examples.

How much does it cost to grind multiple stumps in Kansas?

The first stump carries the travel and setup charge. Each additional stump on the same visit usually costs much less, around $60 for an 18-inch stump in Kansas. Bundling every stump into one visit is the easiest way to save.

Sources and methodology

Last updated . Prices are estimates built from published contractor rates, national cost guides and federal labor data. Read how we calculate prices.