Stump Grinding Cost in New Jersey (2026)

Stump grinding in New Jersey usually costs $155 to $335 for one average 24-inch stump, about $235 typical and about 13% above the U.S. average. High labor and living costs make New Jersey one of the priciest states.

Large tracked stump grinder run by remote control over a huge tree stump in New Jersey
$235
Typical price, one 24" stump
$155–$335
Common range, 24" stump
$2.26–$5.65
Per inch of diameter
+13%
Versus the U.S. average

How much does stump grinding cost in New Jersey?

Grinding one average stump in New Jersey costs about $235, with most quotes between $155 and $335 for a 24-inch stump. That is 13% above the national average. Small stumps usually cost the job minimum of around $170, and each extra stump on the same visit costs far less than the first.

Stump grinding cost by diameter (New Jersey, one stump)
Stump diameterLowTypicalHighEach extra stump
6 inches$115$170$230$45
12 inches$130$190$265$45
18 inches$140$210$300$70
24 inches$155$235$335$95
30 inches$170$260$365$120
36 inches$185$285$400$140
48 inches$225$360$510$215
60 inches$265$435$620$290
Typical cost for one 24-inch stump: New Jersey vs. similar states
Typical cost for one 24-inch stump: New Jersey vs. similar states
New Jersey$235
Oregon$235
Minnesota$230
Washington$230
California$230
U.S. average$210

Estimates at typical rates, softwood or average wood, chips left on site.

Tree stump with large exposed surface roots spreading across the lawn
Wide surface roots, common on mature red maple trees, add root-grinding time to a quote.

Common trees and stumps in New Jersey

Trees homeowners most often grind out in New Jersey
TreeWoodWhat it means for price
Red maplehardwoodVery common.
Pin oakhardwoodDense with wide roots.
London planehardwoodLarge street and yard trees.
Pitch pinesoftwoodPine Barrens; grinds quickly.

What drives stump grinding prices in New Jersey

Stump diameter sets the base price everywhere, but these local factors move New Jersey quotes up or down:

  • Dense suburbs. Tight lots and fences add time.
  • One Call law. New Jersey requires a locate before any excavation.

Hardwood vs. softwood stumps in New Jersey

Red maple, Pin oak, London plane stumps are dense hardwood, so expect about 10% to 25% more than a pitch pine stump of the same size. Softwood and palm stumps grind faster and usually sit at the low end of the range.

Example stump grinding quotes in New Jersey

Single-stump prices only tell part of the story. These worked examples show what common jobs typically cost in New Jersey once multiple stumps, hardwood and extras are included.

Example stump grinding jobs in New Jersey
JobTypical priceLikely range
One small 12" softwood stump$190$130–$265
Three 18" stumps, same visit$355$225–$505
One 24" oak stump, chips hauled away$340$245–$450
One 40" hardwood stump with surface roots$525$395–$670
Five 10" stumps after a storm cleanup$360$260–$525

Estimates use local labor costs and typical published rates. Real quotes also depend on access, soil and how busy local crews are. For ways to bring these numbers down, see grinding multiple stumps and the cheapest time of year to book.

Why New Jersey prices differ from the national average

Labor is the biggest part of a stump grinding bill. Tree trimmers in New Jersey earn a mean of $33.54 an hour, against $26.91 nationally, according to the Bureau of Labor Statistics. The state's overall price level is 108.8 on the Bureau of Economic Analysis scale, where 100 is the U.S. average. We blend both figures to set New Jersey prices 13% above the national level.

Tree stump wedged between a house foundation and fence, a hard-access stump grinding job
Stumps close to a house, fence or buried utilities need extra care and often cost more.

Call 811 before stump grinding in New Jersey

Grinders cut 6 to 12 inches below ground, deep enough to hit shallow gas, power or irrigation lines. Most professionals request a utility locate first. You can file a free request through New Jersey One Call (811) or by dialing 811 at least a few business days before the job.

Best time of year to grind stumps in New Jersey

Spring and fall are busiest. Winter can be cheaper.

Stump grinding prices in New Jersey cities

  • Newark
  • Jersey City
  • Paterson
  • Edison
  • Toms River
  • Trenton

Estimate your own New Jersey project

Stump grinding cost calculator

Instant stump grinding price range that updates as you type.

Largest stump, measured across the widest point at ground level.
Wood type
Add extras (optional)
Extras
Estimated total $209 Typical range $140 to $295 One 24-inch stump, U.S. average, chips left on site. Compare free quotes from local pros

Keep reading

Browse all stump guides or go back to the stump grinding costs homepage.

Frequently asked questions

Why is stump grinding expensive in New Jersey?

High wages and living costs make New Jersey one of the priciest states for stump grinding.

Do I need to call 811 before stump grinding in New Jersey?

Yes. New Jersey law requires a One Call locate before digging.

Is it cheaper to grind stumps in South Jersey?

Often slightly, because labor costs are lower than in North Jersey.

How much does it cost to grind a small stump in New Jersey?

A small stump up to 12 inches across usually costs $130 to $265 in New Jersey. Most companies charge their job minimum for a single small stump, so grinding several at once is far better value.

How much does it cost to grind a large stump in New Jersey?

A 36-inch stump typically costs $285 in New Jersey, and a 48-inch stump about $360. Very large stumps need bigger machines and more time, so many companies charge a higher per-inch rate above 36 inches.

What is the stump grinding cost per inch in New Jersey?

Most companies charge $2.26 to $5.65 per inch of diameter in New Jersey, plus a minimum charge. See our stump grinding cost per inch guide for worked examples.

How much does it cost to grind multiple stumps in New Jersey?

The first stump carries the travel and setup charge. Each additional stump on the same visit usually costs much less, around $70 for an 18-inch stump in New Jersey. Bundling every stump into one visit is the easiest way to save.

Sources and methodology

Last updated . Prices are estimates built from published contractor rates, national cost guides and federal labor data. Read how we calculate prices.