Stump grinding in Oregon usually costs $155 to $335 for one average 24-inch stump, about $235 typical and about 13% above the U.S. average. The highest tree-crew wages in the U.S. put Oregon among the priciest states.
How much does stump grinding cost in Oregon?
Grinding one average stump in Oregon costs about $235, with most quotes between $155 and $335 for a 24-inch stump. That is 13% above the national average. Small stumps usually cost the job minimum of around $170, and each extra stump on the same visit costs far less than the first.
| Stump diameter | Low | Typical | High | Each extra stump |
|---|---|---|---|---|
| 6 inches | $115 | $170 | $230 | $45 |
| 12 inches | $130 | $190 | $265 | $45 |
| 18 inches | $140 | $210 | $300 | $70 |
| 24 inches | $155 | $235 | $335 | $95 |
| 30 inches | $170 | $260 | $365 | $120 |
| 36 inches | $185 | $285 | $400 | $140 |
| 48 inches | $225 | $360 | $510 | $215 |
| 60 inches | $265 | $435 | $620 | $290 |
Common trees and stumps in Oregon
| Tree | Wood | What it means for price |
|---|---|---|
| Douglas fir | softwood | Oregon’s state tree; large stumps. |
| Bigleaf maple | hardwood | Large and resprouts. |
| Western red cedar | softwood | Large but soft. |
| Oregon white oak | hardwood | Dense and sometimes protected. |
What drives stump grinding prices in Oregon
Stump diameter sets the base price everywhere, but these local factors move Oregon quotes up or down:
- Highest wages. Oregon tree workers earn the highest mean wage in our dataset.
- Wet winters. Soft ground makes access harder.
- Tree permits. Portland and other cities regulate removals.
Hardwood vs. softwood stumps in Oregon
Bigleaf maple, Oregon white oak stumps are dense hardwood, so expect about 10% to 25% more than a douglas fir stump of the same size. Softwood and palm stumps grind faster and usually sit at the low end of the range.
Example stump grinding quotes in Oregon
Single-stump prices only tell part of the story. These worked examples show what common jobs typically cost in Oregon once multiple stumps, hardwood and extras are included.
| Job | Typical price | Likely range |
|---|---|---|
| One small 12" softwood stump | $190 | $130–$265 |
| Three 18" stumps, same visit | $355 | $225–$505 |
| One 24" oak stump, chips hauled away | $340 | $245–$450 |
| One 40" hardwood stump with surface roots | $525 | $395–$670 |
| Five 10" stumps after a storm cleanup | $360 | $260–$525 |
Estimates use local labor costs and typical published rates. Real quotes also depend on access, soil and how busy local crews are. For ways to bring these numbers down, see grinding multiple stumps and the cheapest time of year to book.
Why Oregon prices differ from the national average
Labor is the biggest part of a stump grinding bill. Tree trimmers in Oregon earn a mean of $35.40 an hour, against $26.91 nationally, according to the Bureau of Labor Statistics. The state's overall price level is 103.4 on the Bureau of Economic Analysis scale, where 100 is the U.S. average. We blend both figures to set Oregon prices 13% above the national level.
Call 811 before stump grinding in Oregon
Grinders cut 6 to 12 inches below ground, deep enough to hit shallow gas, power or irrigation lines. Most professionals request a utility locate first. You can file a free request through Oregon Utility Notification Center (811) or by dialing 811 at least a few business days before the job.
Best time of year to grind stumps in Oregon
Summer and early fall are easiest. Wet winters slow access.
Stump grinding prices in Oregon cities
- Stump grinding cost in Portland
- Salem
- Eugene
- Gresham
- Hillsboro
- Bend
Estimate your own Oregon project
Keep reading
-
Cost guide Is Stump Grinding Worth It? Is stump grinding worth the cost? Weigh the price against hazards, pests, regrowth, lawn space and property value, plus when leaving a stump is fine. -
Cost guide Cost to Grind Multiple Stumps Grinding multiple stumps costs far less per stump. The first stump includes the trip charge; each extra usually costs $30 to $75. See 2 to 10 stump examples. -
DIY How to Get Rid of a Tree Stump How to get rid of a tree stump: grinding, digging, chemical removal, natural rotting and full removal compared by cost, time and effort, with the best pick.
Browse all stump guides or go back to the stump grinding costs homepage.
Frequently asked questions
Why is stump grinding so expensive in Oregon?
Oregon has the highest tree-trimmer wages we track, which lifts prices well above average.
Does bigleaf maple grow back after grinding?
It can. Grind deep and cut new shoots.
Who do I call before stump grinding in Oregon?
Call 811 through the Oregon Utility Notification Center.
How much does it cost to grind a small stump in Oregon?
A small stump up to 12 inches across usually costs $130 to $265 in Oregon. Most companies charge their job minimum for a single small stump, so grinding several at once is far better value.
How much does it cost to grind a large stump in Oregon?
A 36-inch stump typically costs $285 in Oregon, and a 48-inch stump about $360. Very large stumps need bigger machines and more time, so many companies charge a higher per-inch rate above 36 inches.
What is the stump grinding cost per inch in Oregon?
Most companies charge $2.26 to $5.65 per inch of diameter in Oregon, plus a minimum charge. See our stump grinding cost per inch guide for worked examples.
How much does it cost to grind multiple stumps in Oregon?
The first stump carries the travel and setup charge. Each additional stump on the same visit usually costs much less, around $70 for an 18-inch stump in Oregon. Bundling every stump into one visit is the easiest way to save.
Sources and methodology
Last updated . Prices are estimates built from published contractor rates, national cost guides and federal labor data. Read how we calculate prices.